Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the subscriber for the custom event. The email address must already be subscribed to the audience.

Must be 2-30 characters in length. Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters will be ignored.

Additional properties for this event (e.g. "User Type: Premium", "Preferred Communication: Email", etc). Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters in the first column only will be ignored.

A Custom Value is typically used here to pass in the Campaign ID from a "Create Campaign" or "Find Campaign" step. Learn more

The tag to which the subscriber will be added.

The email address of the person you want to add to this segment. Note: the email address must already be subscribed to the audience, or this will fail.

The name of the Campaign to find

The name of the Campaign to find

Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

The HTTP method we'll use to perform the request.

Any URL with a querystring will be re-encoded properly.

If yes, request data below will be overridden with the raw data from the previous step (you are still responsible for headers though, like Content-Type). Defaults to no.

Place raw data for the request here. Could be JSON, XML, etc. Nothing is parsed for you here (including extra line breaks or spaces -- everything is sent verbatim). You probably need to define a header below corresponding to your data Content-Type. Reminder: data provided in this field is completely ignored if you chose "yes" to pass-through.

By default we convert fields with double underscores into nested dictionaries. Select no here to turn this behavior off.

A pipe (|) separated username, password combo for standard HTTP authentication.

Key, value pairs to be added as headers in all requests.

Any URL with a querystring will be re-encoded properly.

Pay special attention to the proper mapping of the data below.

These are key-value pairs that will form the data portion of the request. If you leave these empty, all fields from the previous step will be used. If you want to send your own raw JSON or form-encoded values here, please use the Custom Request action instead.

Wraps the request in an array if that is something the service requires.

A file object to be attached to the request. The request will automatically be converted to multipart/form-data, with the above payload type defining the sub content-type for the data being passed.

By default we convert fields with double underscores into nested dictionaries. Select no here to turn this behavior off.

A pipe (|) separated username, password combo for standard HTTP authentication.

Key, value pairs to be added as headers in all requests.

Don't see your Page listed? Access your Business account's Settings to confirm the connected account has correct 'Manage Page' permissions and re-connect your account. See help docs for more info.

If your sample in the next step doesn't include custom form fields, try selecting a specific form in the field above or following these steps to create a new test lead.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

The email address of the subscriber you want to add a note to. The email address must already be subscribed to the audience.

The content of the note. Note length is limited to 1,000 characters.

API docs for Mailchimp are located here https://mailchimp.com/developer/reference/

Requests can only be made to domains associated by this application.

These params will be URL-encoded and appended to the URL when making the request.

Authentication headers are included automatically

Zapier will apply these optional headers and values to the request in addition to any headers created as part of the authentication mechanism.

Zapier will pass this along raw. If you would like to provide complex JSON, try a "Code by Zapier" step to build the structure and pass it along here. For example, {"foo": "bar"} is perfectly valid.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).

This should return a list of dictionaries of content type JSON in reverse chronological order. For example: [{"id":1234},{"id":1235}]

If the returned JSON is not a list and is instead an object (maybe paginated), enter the key that contains the results. Example: "results", "items", "objects", etc... (children via dot syntax supported)

Zapier deduplicates the array we see each poll against the id key. If the id key does not exist, you should specify an alternative unique key to deduplicate off of. If neither are supplied, we fallback to looking for the shortest key with id in it otherwise we will raise an error.

If the content fetched is XML or HTML, optionally define an xpath to extract data from the content. Will trigger whenever the content at the xpath changes!

A pipe (|) separated username, password combo for standard HTTP authentication.

Key, value pairs to be added as headers in all requests.

By default, Zapier gives you the entire payload of the webhook. If this is specified, Zapier will only grab the child key from the object(s) sent to Zapier. For example, given {"contact": {"name": "Mike"}}, add "contact" here to only return {"name": "Mike"}. Traverse more deeply nested children by using dot-separated syntax. Line item payloads will run your Zap for each instance of the child key.

We recommend not putting any query string arguments in the URL (use "Query String Params" below).

These params will be URL-encoded and appended to the URL when making the request. Note: If you specify nothing for this field, we will automatically encode and include every field from the previous step in the query string. If you don't want this, use the "Custom Request" action.

If "yes", this dumps the results directly to a key (set below) as JSON. If "no", we simulate a form.

Only used if As JSON.

By default we convert fields with double underscores into nested dictionaries. Select no here to turn this behavior off.

A pipe (|) separated username, password combo for standard HTTP authentication.

Key, value pairs to be added as headers in all requests.

Any URL with a querystring will be re-encoded properly.

Pay special attention to the proper mapping of the data below.

These are key-value pairs that will form the data portion of the request. If you leave these empty, all fields from the previous step will be used. If you want to send your own raw JSON or form-encoded values here, please use the Custom Request action instead.

Wraps the request in an array if that is something the service requires.

A file object to be attached to the request. The request will automatically be converted to multipart/form-data, with the above payload type defining the sub content-type for the data being passed.

By default we convert fields with double underscores into nested dictionaries. Select no here to turn this behavior off.

A pipe (|) separated username, password combo for standard HTTP authentication.

Key, value pairs to be added as headers in all requests.