ThriveCart + LearnDash + Google Sheets Integrations
How to connect ThriveCart + LearnDash + Google Sheets
Zapier lets you send info between ThriveCart, LearnDash, and Google Sheets automatically—no code required.
Do even more with ThriveCart + LearnDash + Google Sheets
With Zapier, you can do more than just connect your apps - you can automate entire processes from beginning to end! Check out the following list of triggers and actions you can use with ThriveCart, LearnDash, and Google Sheets. And don’t forget that you can add more apps and actions to create complex workflows.
Product
Use this if you only want to trigger this Zap when an affiliate is approved for particular products.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Only trigger if part of a bulk payout?
Check to only trigger if this payment covers multiple commissions.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Product
Use this if you only want to trigger this Zap when an affiliate is rejected/revoked from particular products.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Bump
Choose a particular bump from the list.
Coupon Code
Choose a coupon to only trigger if that coupon was applied to this order.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by Mode
Choose whether this should trigger if the purchase is done in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Downsell
Choose a particular downsell from the list.
Coupon Code
Choose a coupon to only trigger if that coupon was applied to this order.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by Mode
Choose whether this should trigger if the purchase is done in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Upsell
Choose a particular upsell from the list.
Coupon Code
Choose a coupon to only trigger if that coupon was applied to this order.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by Mode
Choose whether this should trigger if the purchase is done in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the cancellation is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the payment is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the pause is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Api Docs Info
API docs for ThriveCart are located here https://apidocs.thrivecart.com/
HTTP MethodRequired
URLRequired
Requests can only be made to domains associated by this application.
Query String Parameters
These params will be URL-encoded and appended to the URL when making the request.
Headers
Authentication headers are included automatically
Additional Request Headers
Zapier will apply these optional headers and values to the request in addition to any headers created as part of the authentication mechanism.
Body
Zapier will pass this along raw. If you would like to provide complex JSON, try a "Code by Zapier" step to build the structure and pass it along here. For example,
{"foo": "bar"}is perfectly valid.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Course(s)
Course(s) that will trigger this zap. Select one or more courses. If none selected, all courses will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.
Essay Submitted
Triggers when a new essay is submitted.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Course
Select course the lesson(s) belong to.
Lesson(s)
Lesson(s) that will trigger this zap. Select one or more lessons. If none selected, all lessons will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Course
Select course the topic(s) belong to.
Lesson
Select lesson the topic(s) belong to.
Topic(s)
Topic(s) that will trigger this zap. Select one or more topic(s). If none selected, all topics will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.User EmailRequired
User email address that will be enrolled into course(s). Enter the user's old email address if you want to replace it with the new one in New User Email field.
Username
Username to use when creating a new account. This field won't be used for existing user account.
First Name
First name of the user enrolled into the course(s).
Last Name
Last name of the user enrolled into the course(s).
Display Name
If specified, it will be used as user display name instead of username.
New User Email
New user email address. If specified, it will replace the user's old email address.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.User EmailRequired
User email address that will be removed from group(s).
New User Email
New user email address. If specified, it will replace the user's old email address.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.No Team Drive
If you want to use this trigger with a Sheet that resides in your Google Team Drive, you have to workaround the issue using these steps.
SpreadsheetRequired
WorksheetRequired
You must have column headers
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers
Trigger Column
Trigger on changes to cells in this column only. Leave this field blank if you want the Zap to trigger on changes to any cell within the row. Please note: All new rows will trigger the Zap even if the Trigger column is empty. Add a Filter step to stop the Zap from continuing if this column is empty in a new row.
Try ItTriggerThis is the start of your ZapScheduledZapier checks for new data every 15 min on the Free planDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
Try ItTriggerThis is the start of your ZapScheduledZapier checks for new data every 15 min on the Free planDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
Spreadsheet Containing the Worksheet to CopyRequired
Worksheet to CopyRequired
Copy To
Which spreadsheet should the worksheet be copied to? If left blank, it will be copied to the spreadsheet containing the original worksheet.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
TitleRequired
Headers
Overwrite?
If a worksheet with the specified title exists, its content would be lost. Please, use with caution.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
RowRequired
If you want to update the same row each time select a row from the dropdown box. To dynamically update the row, click open the dropdown and choose the "Custom" tab, then the "Add a search step" button.
Background Color
Choose from your current custom Theme Color in your Spreadhseet, or enter a color #rrggbb in hexadecimal format.
Text Color
Choose from your current custom Theme Color in your Spreadhseet, or enter a color #rrggbb in hexadecimal format.
Text Bold
True if the text is bold.
Text Italic
True if the text is italicized.
Text Strikethrough
True if the text is strikethrough.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers. See here for more information.
Lookup ColumnRequired
Let us know which column you want to search by with the value below. We will grab the latest matching row and give you all of its values.
Lookup ValueRequired
Supporting Lookup Column
Optionally, specify another column you want to search by. Note that if you supply this, the Zap will trigger only on rows that match both columns. (An example column might be something like Email Address or Phone Number)
Supporting Lookup Value
An example value might be me@example.com or 555-5555
Bottom-Up
Search from bottom of the sheet?
Row Count
Number of rows to return. Max is 500.
ActionThis is an event a Zap performs.SearchFind existing data in your appDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers. See here for more information.
ColumnsRequired
Let us know which columns to return. e.g. A:Z
Row CountRequired
Number of rows to return. Max is 500.
First Row
Number of the first row to return (1 is the header)
ActionThis is an event a Zap performs.SearchFind existing data in your appDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
TitleRequired
Value of the Worksheet Title to match exactly. Search is case-sensitive.
Headers
Overwrite?
If a worksheet with the specified title exists, its content would be lost. Please, use with caution.
ActionThis is an event a Zap performs.Search or writeFind existing data in your app, or create a new record if no data is found
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Only trigger if part of a bulk payout?
Check to only trigger if this payment is accruing for a bulk payout.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Product
Choose the product or products you want to trigger this Zap for.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Product
Choose the product or products you want to trigger this Zap for.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Product
Choose the product or products you want to trigger this Zap for.
Coupon Code
If you want trigger this Zap only when a specific coupon or coupons are used, then you can select these above. Leaving this blank will ensure all orders trigger.
Filter by 'Opt-in checkbox'
If your cart page has an opt-in checkbox added to it, only run if the customer checked it.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the purchase is done in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the payment is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the completion is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the refund is done in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Item type
Choose which item you want to trigger this Zap for.
Filter by affiliate ID
Enter an affiliate ID to only trigger if the order was referred by a particular affiliate.
Filter by product status
Choose whether this should trigger if the resume is made in test mode, live mode, or both. Leave blank to trigger for both.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Course(s)
Course(s) that will trigger this zap. Select one or more courses. If none selected, all courses will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Group(s)
Group(s) that will trigger this zap. Select one or more groups. If none selected, all groups will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Group(s)
Group(s) that will trigger this zap. Select one or more groups. If none selected, all groups will trigger this zap.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Course
Select course the quiz(zes) belong to.
Lesson
Select lesson the quiz(zes) belong to.
Topic
Select topic the quiz(zes) belong to.
Quiz(zes)
Quiz(zes) that will trigger this zap. Select one or more quiz(zes). If none selected, all quizzes will trigger this zap.
Quiz Result
Quiz result that will trigger this zap. Leave empty for all results.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.User EmailRequired
User email address that will be added to LearnDash group(s).
Username
Username to use when creating a new account. This field won't be used for existing user account.
First Name
First name of the user added to the group(s).
Last Name
Last name of the user added into the group(s).
Display Name
If specified, it will be used as user display name instead of username.
New User Email
New user email address. If specified, it will replace the user's old email address.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.User EmailRequired
User email address that will be removed from course(s) access. Enter the user's old email address if you want to replace it with the new one in New User Email field.
New User Email
New user email address. If specified, it will replace the user's old email address.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers
Try ItTriggerThis is the start of your ZapScheduledZapier checks for new data every 15 min on the Free planDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
Try ItTriggerThis is the start of your ZapScheduledZapier checks for new data every 15 min on the Free planNo Team Drive
If you want to use this trigger with a Sheet that resides in your Google Team Drive, you have to workaround the issue using these steps.
SpreadsheetRequired
WorksheetRequired
You must have column headers
Trigger Column
Trigger on changes to cells in this column only. Leave this field blank if you want the Zap to trigger on changes to any cell within the row. Please note: All new rows will trigger the Zap even if the Trigger column is empty. Add a Filter step to stop the Zap from continuing if this column is empty in a new row.
Try ItTriggerThis is the start of your ZapInstantThis event starts a Zap instantly.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
Column NameRequired
Index
The column position (zero-based) to insert. If not set, append to the right by default.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.TitleRequired
Spreadsheet to Copy
Create a duplicate of an existing spreadsheet.
Headers
These Headers are ignored if a "Spreadsheet to Copy" is selected.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
RowRequired
Use a search step before this to get the row to delete.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
RowRequired
If you want to update the same row each time select a row from the dropdown box. To dynamically update the row, click open the dropdown and choose the "Custom" tab, then the "Add a search step" button.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Api Docs Info
API docs for Google Sheets are located here https://developers.google.com/sheets/api/reference/rest
HTTP MethodRequired
URLRequired
Requests can only be made to domains associated by this application.
Query String Parameters
These params will be URL-encoded and appended to the URL when making the request.
Headers
Authentication headers are included automatically
Additional Request Headers
Zapier will apply these optional headers and values to the request in addition to any headers created as part of the authentication mechanism.
Body
Zapier will pass this along raw. If you would like to provide complex JSON, try a "Code by Zapier" step to build the structure and pass it along here. For example,
{"foo": "bar"}is perfectly valid.
ActionThis is an event a Zap performs.WriteCreate a new record or update an existing record in your app.Drive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
TitleRequired
Value of the Worksheet Title to match exactly. Search is case-sensitive.
ActionThis is an event a Zap performs.SearchFind existing data in your appDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers. See here for more information.
Lookup ColumnRequired
Specify the column we should search for cells which match the Lookup Value.
Lookup ValueRequired
Supporting Lookup Column
Optionally, specify another column you want to search by. Note that if you supply this, the Zap will trigger only on rows that match both columns. (An example column might be something like Email Address or Phone Number)
Supporting Lookup Value
An example value might be me@example.com or 555-5555
Bottom-Up
Search from bottom of the sheet? In other words, pick the most recent match?
ActionThis is an event a Zap performs.SearchFind existing data in your appDrive
The Google Drive where your spreadsheet resides. If nothing is selected, then your personal Google Drive will be used. If you are connected with any Google Team Drives, you can select it here.
SpreadsheetRequired
WorksheetRequired
You must have column headers. See here for more information.
Lookup ColumnRequired
Specify the column we should search for cells which match the Lookup Value.
Lookup ValueRequired
Supporting Lookup Column
Optionally, specify another column you want to search by. Note that if you supply this, the Zap will trigger only on rows that match both columns. (An example column might be something like Email Address or Phone Number)
Supporting Lookup Value
An example value might be me@example.com or 555-5555
Bottom-Up
Search from bottom of the sheet? In other words, pick the most recent match?
ActionThis is an event a Zap performs.Search or writeFind existing data in your app, or create a new record if no data is found
Top companies trust Zapier to automate work and free up time
Connect your apps and automate workflows
Easy automation for busy people. Zapier moves info between your web apps automatically, so you can focus on your most important work.
How ThriveCart + LearnDash + Google Sheets Integrations Work
- Step 1: Authenticate ThriveCart, LearnDash, and Google Sheets.30 seconds
- Step 2: Pick one of the apps as a trigger, which will kick off your automation.15 seconds
- Step 3: Choose a resulting action from the other app.15 seconds
- Step 4: Select the data you want to send from one app to the other.2 minutes
- That’s it! More time to work on other things.
About ThriveCart
Related categories
Related categories
About Google Sheets
Related categories
Similar apps
Zoho Creator
App Builder, Zoho
Smartsheet
Spreadsheets
Quip
DocumentsGet started for free
You can't add more hours to the day. Zapier is the next best thing.
Other ThriveCart + LearnDash Integrations
Other ThriveCart + Google Sheets Integrations
- leadconnector
- flodesk
- convertkit
- mailchimp
- kartra
- clickup
- webhook
- discord
- thinkific
- xero
- teachable
- trello
- shopify
- hubspot
- airtable
- monday
- mightynetworks
- sendinblue
- keap-max-classic
- zenler
- zoom
- sg-autorepondeur
- quickbooks
- provesource
- postmark
- podia
- pipedrive
- microsoft-outlook
- memberpress
- help-scout
- hello-audio
- google-drive
- google-analytics
- fattura24
- clubworx
- closeio
- bubble
- birdsend
- autopilot
- sms
- manychat
- coach-catalyst
- asana
- agile-crm
- workast
- twilio
- searchie
- membervault
- mailvio
- google-forms
- zoho-crm
- quentn
- mautic
- hellosign
- clockify
- learnybox-d
- getresponse