Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the subscriber for the custom event. The email address must already be subscribed to the audience.

Must be 2-30 characters in length. Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters will be ignored.

Additional properties for this event (e.g. "User Type: Premium", "Preferred Communication: Email", etc). Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters in the first column only will be ignored.

A Custom Value is typically used here to pass in the Campaign ID from a "Create Campaign" or "Find Campaign" step. Learn more

The tag to which the subscriber will be added.

The email address of the person you want to add to this segment. Note: the email address must already be subscribed to the audience, or this will fail.

The name of the Campaign to find

The name of the Campaign to find

Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

Paste your publicly accessible RSS URL here.

If required to access the feed.

If required to access the feed.

This is an advanced option. Go with the recommended unless you're a total pro ;)

Customize the private email address associated with your mailbox. Be sure to use lowercase and numbers only. Just forward emails to this address to trigger this Zap. Want to receive to your own email address? Try Mailgun, IMAP, Mandrill, or Gmail instead.

Can be a comma separated list of emails. Limited to 5.

You can place HTML in here and we will send it as is. If this is plain text, we will try to convert it to some very basic HTML for greater client compatibility.

A file object to be attached to the email. Plain text content will converted into a txt file and attached. Please note, if the file is over ~10mb or so, you should explore using other email sending techniques (like Gmail or SMTP).

This will be your "display name" when sending. Want to send from your own email address? Try Mailgun, IMAP, Mandrill or Gmail apps instead.

Specify a reply address other than your own.

Can be a comma separated list of emails. Limited to 5.

Can be a comma separated list of emails. Limited to 5.

Set this to "yes" if your emails are received without line breaks or spacing.

Want to be notified when this email is opened? Set this to to True and set up a Zap using the New Read Receipt trigger.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

The email address of the subscriber you want to add a note to. The email address must already be subscribed to the audience.

The content of the note. Note length is limited to 1,000 characters.

API docs for Mailchimp are located here https://mailchimp.com/developer/reference/

Requests can only be made to domains associated by this application.

These params will be URL-encoded and appended to the URL when making the request.

Authentication headers are included automatically

Zapier will apply these optional headers and values to the request in addition to any headers created as part of the authentication mechanism.

Zapier will pass this along raw. If you would like to provide complex JSON, try a "Code by Zapier" step to build the structure and pass it along here. For example, {"foo": "bar"} is perfectly valid.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).

Paste publicly accessible RSS URLs, one per line. Maximum of 10.

This is an advanced option. Go with the recommended unless you're a total pro ;)

Customize the private URL for this RSS feed. Letters, numbers, and hyphens only, no spaces.

Defaults to "A Feed Called X" where X is the last portion of the feed's url from above.

50 is the max, but this allows you to reduce the number of items returned in the feed.

The title of the item to publish.

Provide a source URL for where this item is permanently hosted. Most RSS readers turn the title into a clickable link to this URL.

Provide the plain text or HTML content of the feed item.

Use this field to control whether Zapier will truncate data over the 10kb limit (select Yes), or generate an error if the data is too large (select No). See our Help for more information.

Specify a raw download URL for your podcast file, image, or other media file.

What is the MIME type for your raw file? Defaults to audio/mpeg.

Some players require a valid length. Defaults to 0.

Most people would put "now", but you can change it to something like "tomorrow" or "next week monday at 7pm" or "2013-08-23 12:00:00 +0800"! Note, we do not order by pubdate, just by order inserted.

In order to trigger when emails are opened, this must be paired with a separate Zap using the Send Outbound Email action, with the Enable Read Receipts? field set to True.

To test with a live email, send an email to yourself using your Send Outbound Email action (with read receipts enabled) and open it, then test this trigger immediately for samples. If you don't need to test with live data, click Skip Test to use static test data.