The email address of the lead you want to mark as having completed the action.

Select the campaign action you've created under scoring > actions in your KickoffLabs campaign dashboard.

The email address to remove from the contest by excluding them from the ranking. This is not the same as marking them as fraudulent or deleting them.

The email address of leads that have been removed from the leaderboard you want to add back.

The email of the lead you want to look up.

Required if you want to establish this lead as a child/referral from another known lead.

This is the social id of the parent record for this user. In a KickoffLabs URL you'd see it as the ?kid=ABC parameter.

An email address of the lead to add.

Optional phone number of the lead.

First name of your lead.

Optional last name of a lead.

If you know the IP address that was used for this lead then it helps us check for duplicate entries.

Points to add to the lead. On a lead card it shows up as "Bonus Points. If this value is not null, it will overwrite previous values.

If no (and by default) this trigger will only fire the first time a user opens an email.

When samples are pulled in the next step for this trigger, the GROUPINGS data will be static, dummy data ("Example Group Category 1"). Use the example Group values to setup your Zap, and the data should reflect appropriately when the Zap runs.

When samples are pulled in the next step for this trigger, the GROUPINGS data will be static, dummy data ("Example Group Category 1"). Use the example Group values to setup your Zap, and the data should reflect appropriately when the Zap runs.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

The email address of the person you want to remove from this tag. Note: the email address must already be subscribed to the audience, or this will fail.

The email address of the subscriber you want to add a note to. The email address must already be subscribed to the audience.

The content of the note. Note length is limited to 1,000 characters.

Determines which App Extensions will appear in the dropdown below.

The name of the Campaign to find

The name of the Campaign to find

Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

The email address of the subscriber you want to subscribe to this audience. Please don't type an email address in this field, instead this should use a value from a previous step in your Zap. Learn more here.

If yes, a confirmation email will be sent to the address before they appear on the chosen audience.

If no, the Zap will skip/halt this step if the subscriber exists, otherwise overwrites data sent.

Determines what changes to make to the subscriber's groups/interests.

• Add Only The group(s) specified below will be added to the subscriber's existing groups/interests.
• Replace All All of the subscriber's existing groups will be cleared, and replaced with the groups selected below.
• Replace Matching Clears any existing group selections only for the groups specified below. Learn more here.

This should be a two letter language code (ISO639-1) See here for the list of language codes.

The tag(s) to which the subscriber will be added. Tags will be added to any existing tags on existing subscribers.

The email address of the lead you want to remove from your campaign.

The email address that you want to add or remove points from.

The value of points that will be added to the lead. Negative values are also accepted, but you'll never report the negative score.

What would you tell yourself in the future about why these points were added.

The email address(s) of the leads you want to mark as verified.

The email of the lead you want to look up.

The social ID of the lead you are looking up.

Select a link from your campaign to track. It's not currently possible to trigger on all link clicks for a campaign with a single Zap.

If no (and by default) this trigger will only fire the first time a user clicks a link in your campaign.

To prevent timeout errors, please ensure the list of customers for this store does not exceed 3000.

If specified, will only trigger on orders created in this store. Otherwise, will default to all orders in your account.

To prevent timeouts, please ensure the list of subscribers in the segment/tag does not exceed 3000.

Select the audience you want to send the campaign to.

Select which segment or tag you want to send the campaign to. If no segment/tag is selected, the campaign will be sent to the entire audience selected above.

This snippet will appear in the inbox after the subject line.

Supports *|MERGETAGS|* for recipient name, such as *|FNAME|*, *|LNAME|*, *|FNAME|* *|LNAME|*, etc.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

Select either a template or provide HTML email content, you cannot provide both. If both fields are left blank, the campaign draft will have no content.

The email address of the subscriber for the custom event. The email address must already be subscribed to the audience.

Must be 2-30 characters in length. Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters will be ignored.

Additional properties for this event (e.g. "User Type: Premium", "Preferred Communication: Email", etc). Note: Letters, numbers, underscores, hyphens, and any spaces between are considered valid characters. Any invalid characters in the first column only will be ignored.

The email address of the subscriber you want to unsubscribe from this audience.

Completely delete this contact from MailChimp? (No: just unsubscribe them)

A Custom Value is typically used here to pass in the Campaign ID from a "Create Campaign" or "Find Campaign" step. Learn more

The tag to which the subscriber will be added.

The email address of the person you want to add to this segment. Note: the email address must already be subscribed to the audience, or this will fail.

API docs for Mailchimp are located here https://mailchimp.com/developer/reference/

Requests can only be made to domains associated by this application.

These params will be URL-encoded and appended to the URL when making the request.

Authentication headers are included automatically

Zapier will apply these optional headers and values to the request in addition to any headers created as part of the authentication mechanism.

Zapier will pass this along raw. If you would like to provide complex JSON, try a "Code by Zapier" step to build the structure and pass it along here. For example, {"foo": "bar"} is perfectly valid.

The email address of the Subscriber you want to find.

Limit your search to this specific Audience.

Examples: Conference Lead, Influencer, or Donor (Tag length is limited to 100 characters).